More from: Wood Floor

Tips For Cleaning Your Floor Without Leaving Streaks

Clean Wood Floor

Your floor is one of the most important areas of your house. A clean and gleaming floor does much to add to the house’s aesthetic appeal. It is paramount therefore that you learn the best way to clean your floor without causing it damage. Here are some of the most essential tips on how best to get a sparkling floor without destroying it with hideous streaks. These tips are a sure win regardless of whether your floor is wooden, linoleum or vinyl among others.

Get Rid of Dust

Most people go wrong by starting the cleaning process with mopping. As you struggle to get the mud off the floor, streaking is inevitable. The best approach to cleaning is to dust it off first. Sweeping and vacuuming are the best ways to do this. Dust causes small scratches on the floor that eventually lead to larger more visible damage. When vacuuming, ensure that you pick the best vacuum type for your floor.

Choosing a Cleaner

There are different cleaning mixtures in the market for different types of floors; terrazzo, wood, ceramic and marble to name but a few. Using the wrong solution can be very hazardous. The cleaners are well labelled and indicate the specific floor to be used on. After getting the right cleaner, you can still go wrong if you mix it in incorrect amounts. A mix that is too strong leaves hideous streaks of chemical remnants and one that is too weak leaves streaks of dust particles. Keenness is thus the best way to avoid streaking. A thorough reading of instructions and usage and adherence to these will keep your floors clean and streak-free.


This is the most crucial step to getting a clean gleaming floor with zero streaks. It should be done meticulously so it is even and smooth. The trick is to do one section at a time ensuring the finishing is perfect. You can basically begin at the far corners of the room and work section by section to the exit. This helps avoid stepping on already cleaned areas and leaving residues. Ensure you apply a mopping style that will not leave any spots unclean. Keep the mop well rinsed also as you move through sections to avoid streaks from any dirt that was missed during vacuuming.


Water is an essential part of cleaning your floor. Hard water is emblazoned with many minerals that can make mixing the cleaning solution harder and even wasteful. The minerals can also cause streaks on the floors even after a thorough cleaning. This can be solved by either getting your house a water softening system or purchasing distilled water for your mopping needs.

Your floor is an important investment that deserve care and attention to serve you right. There is a beauty in a clean streak free floor that is wholesome and rare. It gives the whole house a fresh and spacious feel. These tips followed to the letter will invite this beauty into your home, office or business place. Cleaning effectively has never been simpler.

How to Replace Wood Floor Boards

Have you ever had concerns about a damaged hardwood board in your house and you don’t have a professional to fix it? You are not the only person. Everyone who has a hardwood floor will certainly have to replacement a damaged board at some time. Board replacement is a common in the hardwood flooring industry.

Wooden Floor BoardsMost boards which need to be replaced are due to events which are out of our control, for instance: environmental factors, objects that fall shoes, damage from furniture, pets and children. A board replacement will make your flooring looking as if it was never damaged before and you won’t know that replacement has been done.

Here are the simple steps on how you can replace a damaged board in you flooring.

Tools needed for board replacement:

  • Circular Saw
  • Hammer
  • Chisel
  • Painters tape
  • Miter Box
  • Epoxy
  • Small pry bar
  • Painters plastic (used to prevent the furniture from dust exposure)

Step 1: Cover the bottom side of your circular saw using a blue tape so that it may not scratch your flooring. Set up the depth of the skill saw to match the thickness of the board you want to replace. Apply blue tape throughout the board that is being cut so that you do not accidentally cut into a different plank. Cut down the side of the board on the groove surface and on the tongue surface and then make an additional cut diagonally across the first two cuts you had made.

Step 2: Using a pry bar and a hammer, pull up the two halves in the center of the board. Chisel out the few remaining pieces that are stuck around the edges.

Step 3: Pull out the nails and cut out the rosin paper or the felt. Take a vacuum cleaner to clean any debris.

Step 4: using the #2080 painters tape, obtain the measurements of the area that was cut out.

Step 5: Measure the new board and cut it into desired lengths needed. Using a sanding sponge, create a slight bevel especially on the cut edge. Cut the bottom groove off the width and length of the board.

Step 6: Apply urethane adhesive to the cleaned sub floor in a snake like pattern. Place the new board in; sliding the tongue into place first. Use a block of wood to tap down gently and precisely on the new board. This will knock it in place.

Step 7: Apply some weight to the board until the adhesive cures. Use a cleaner to clean any debris.

You have now finished your board replacement! Very simple process indeed!

Here are installation tips that you have to put in mind before you conclude your work:

Tip 1: As a result of natural color changes in most wood species, the replaced board may not actually match the old flooring. If this is happens, let the new board sit in a spot where it will receive the most light for a week. Direct light quickens the color change which allows the new board to match with the old flooring in a better. This also helps the new board toughen to the new environment of the home.

Tip 2: Measure the sides of the old board to make sure that it is equal to the sides of the new board. If the old board has expanded, the new board will not fit. The board replacement should be adjourned until a drier climate.

Now that you know how to replace wood floor boards, make sure you also know how to pick the best wood floor coating. For more great tips on hardwood floors, hardwood floor vacuums, and cleaning wood floors in general, visit Homestadna. Good luck with your project!

How to Pick The Best Wood Floor Coating For Your Home

Your lifestyle as well as maintenance preferences play a key role in selecting the right type of finish for the wood floors. A wood floor coating will be the best, if it can be easily applied, maintained and lasts at least for four to five years. When it wears out, it must be easily refinished able. All wood floors require regular maintenance including cleaning, sweeping and mopping to keep them looking beautiful.

Different coatings make a significant impact on the appearance depending upon their maintenance. The coating should be water resistant, durable and require minimum maintenance.

There are wax finishes. They seal the pores and form a protective covering. These finishes provide a durable surface, but show up spots due to water or the presence of other contaminates. In addition, there are acrylic impregnated wood coatings that offer an extremely hard and highly durable floor. These coatings are generally used in high traffic commercial settings including restaurants and malls.

The Best Coating

Most wood floor coatings are blends of synthetic resins. Out of various coatings used, urethanes or polyurethanes provide a wear resistant and durable protective layer. These are most preferred types of coating.

Best Wood Floor CoatingA polyurethane coating is liked because of it is easy to apply. It also provides a clear and durable finish. It can bear traffic; resist the spills as well as other common minor mishaps that are common for wooden floors. The floor can be easily cleaned and maintained. Normally, the floors can be refinished after a light sanding and applying a couple of coats of polyurethane.

Most renowned manufacturers of this polyurethane coating provide a range of products with a glossy, semi-glossy, matte or hand a-rubbed appearance. You can use two or three coats to get high gloss and extra protection.

Polyurethane is most commonly used for a clear and hard top coating for finish and protection. Basically, you get two types of polyurethane finishes: water-based and solvent-based.

A solvent-based coating undergoes a chemical reaction when it cures. It provides a hard surface, but there are fumes while working with it. There can be a noticeable change in color with a light coat.

The water based polyurethane coating is easy to apply. Fast-drying polyurethane preparations are made to provide most durable coatings that can be used after all types of staining. Water-based finishes provide clear top coating and resist the surface from becoming yellow over time. These coatings also have a very mild odor, but dry fast in two to three hours.

The manufacturers supply non catalyzed emulsion finishes for use by homeowners. These products are less toxic, have a low-odor, and dry fast. In addition, the water-based polyurethane coating offers a durable rich tone of polyurethane.


  • Solvent free
  • Provides excellent adhesion
  • Can provide excellent glossy or matte finish
  • Has best stain resistance and retention
  • Provides hardness and wear resistant surface
  • It is nontoxic and dries easily
  • Easy to clean and maintain

The surface should be properly cleaned to remove dust, grease, waxes and foreign particles. The wood can be stained with water, oil based or gel stain. The grain, texture and sap in the natural wood vary considerably. You may have to match the different pieces to get the required finish or tones. The wood surface is to be sealed with a sealer and sanded before applying top coating. It is advisable to use protective wears as advised by the manufacturers. Visit for more tips and ideas on how to maintain your wood floors and keep them looking new.